G-Force reduces mobilizations and labor costs by hardening and densifying your freshly poured concrete before applying the curing compound. Just pour the floor and steel trowel to the finish you want. Then soft-cut your control joints and clean up the dust. Spray on G-Force and let it dry - typically less than an hour. You’re ready to apply the specified curing compound or cure and seal. One trip, one step, one application, one product and one bundle of labor-cost savings. Coverage: 600-800 square feet per gallon5.
For any further queries and bulk buying Contact US

Xtreme Shield is a finishing conditioner applied after polishing. It introduces additional Colloidal Silica to the slab, along with a thin, clear polymer layer that gives extra protection to the slab surface. It brings out the color in integrally pigmented, stained or dyed concrete, giving a slight “wet look” that works excellently with exposed aggregate.  The polymer provides extra protection against accidental staining from spills. It is particularly useful against mild acids, such as might be encountered in environments where food is handled or served. Provides enhanced water repellency, stain resistance and gloss development. Coverage: 1500-2000 square feet per gallon5. Apply as thinly as possible.

Col-Lit FORMULA MP is a chemically reactive, colorless treatment designed for colored concrete floors. It is designed for the production of ground and polished architectural concrete, it produces a floor surface which withstands abrasion, creates greater gloss reflection, higher surface compressive strength and reduces dusting. This multi-purpose formula can be diluted with clear water on site. Mix 1:1 when treating high quality hard steel troweled floors. For porous floors or poor quality, treat full strength for best results. The capability to achieve excellent results on a variety of a surface substrates makes Xtreme Hard Col-Lit FORMULA MP a perfect choice. Xtreme Hard Col-Lit FORMULA MP has zero VOC content just like the rest of the Xtreme line, it is economical to use, and provides a longer life, and higher reflectivity than the competitor’s products (on colored concrete and polished concrete floors). The treated and finished concrete will provide a surface that is non-toxic, easy to maintain, and environmentally sound with a low-to-moderate sheen. Coverage: 400-600 square feet per gallon5.

Xtreme Hard is a highly reactive Colloidal Silica-based densifying agent. The Colloidal Silica molecule has more reactive sites, so it goes to work quickly, within 1-2 minutes. Spray it on the concrete until the surface is saturated, then agitate with a broom. Wait until dry. Xtreme Hard is a green, clean and safe material. Its low pH formula (pH approx 8.7, only slightly higher than baking soda) is safer for you to handle. Xtreme Hard emits no Volatile Organic Compounds (VOCs) and eliminates the hazardous-material disposal, so it’s better for the job site and friendlier to the planet.  Xtreme Hard is shipped as a concentrate. One gallon of concentrate makes five gallons of ready-to-use product. Xtreme Hard is the lowest cost densifier per square foot. Coverage: 400-600 square feet per gallon5.

Xtreme Hard is a highly reactive Colloidal Silica-based densifying agent. The Colloidal Silica molecule has more reactive sites, so it goes to work quickly, within 1-2 minutes. Spray it on the concrete until the surface is saturated, then agitate with a broom. Wait until dry. Xtreme Hard is a green, clean and safe material. Its low pH formula (pH approx 8.7, only slightly higher than baking soda) is safer for you to handle. Xtreme Hard emits no Volatile Organic Compounds (VOCs) and eliminates the hazardous-material disposal, so it’s better for the job site and friendlier to the planet. Xtreme Hard is shipped as a concentrate. One gallon of concentrate makes five gallons of ready-to-use product. Xtreme Hard is the lowest cost densifier per square foot. Coverage: 400-600 square feet per gallon5.